Pages Navigation Menu

5 Great Tips to Make Your Roof Withstand High Winds

5 Great Tips to Make Your Roof Withstand High Winds

damaged roof due to high windsWhenever factors that can cause damage to roofs are considered, one of the biggest of them is high winds. And one of biggest factors again during high winds is the debris blown by the wind, especially other houses’ failed roofs.

You can search for the best roofer in your area from Roofing Architects. But while planning to revamp your roof, you should essentially instruct them to make the roof strong enough to withstand high winds.

A roof is not just a single layer. It’s made of many layers and includes strong joints with the walls which is the right design for the overall shape of the home, the best underlayment, good roof decking and finally the right top layer.

Here are five great tips for you to make sure your roof has been built to withstand high winds efficiently.

1. Structural Design Should Be Good

The thing you should consider first is the floor plan of your home. If the floor plan has been intelligently created, it can lessen the load of wind on the roofing system, making it less prone to failing. Typically, square, hexagonal and octagonal floor plans are the best for this because they increase wind resistance. Having a 30-degree sloped roof with several slopes is also a good idea for the best performance.

2. Underlayment Should Be Right

No matter how wind-resistant roofing material you choose, it won’t help you much if the decking system underneath isn’t very good. When getting a new roof installed, be sure that damp or rotted wood is removed and particleboard is substituted with heavier and stronger plywood. Next, make sure that nails used for fastening are ring-shanked and not more than 6 inches apart.

Standard roofing felt atop the underlayment can make it longer lasting and moisture-resistant. Safeguard soffit vents, roof vents and other secondary systems from uplift too to avoid forming susceptibilities for your home and roof.

repairing roof

3. Fasteners are Important

Regardless of what sort of roof you install, nails are anytime better than staples. Staples are even banned in some states. If you are going to install an asphalt roof, ask for six nails per shingle rather than four. They should be 8D, ring-shanked nails with water-proof gaskets around them for having the best possible results and save your roof from getting damaged in the next windstorm.

4. Small Overhangs with Less Uplift

You may be tempted to install long overhangs because they look nice and dramatic. However there can be a roof failure because of strong wind coming up under those long overhangs and prying up the roof deck. When overhangs are not more than 20 inches, structural integrity of your home is increased. Remember that stretched out awnings and add-on porches work like overhangs as well.

repairing roof

5. Wind-resistant Metal Roof

Some metal roofing is strong enough to withstand winds of more than up to 150 miles per hour which is more than most homes can deal with. When metal roofing is installed in a continuous pane with vertical seems from eave to peak, only a few to none places are left for the wind to enter to cause failure. When the roof is made from shingles, wind can enter beneath some rows and pull out several shingles. Thus with properly installed metal roofing there are fewer chances of failure. Plus, metal roofing comes with a warranty of 40, 50 or even more years and needs almost no maintenance.

By making the right choices, you can highly increase the chances of your roof surviving in any high winds. So, choose the right roofer from Roofing Architects and get the right roof to be well-prepared for high winds and adverse climate.

Recent Posts